HOME  >>  EMISSIONS TESTING  >>   COMPLIANCE TESTING  >>  RULE APPLICABILITY

Rule Applicability
Rule Applicability

We make sure you are compliant with both Federal and State standards.


Source Category Burn Type Engine Type Manufacture Date HP Operating Conditions Emission Limits (g/HP–hr)
NOx
Spark Ignited Engine Any HP<240 Not Required to Register
Any 240≤HP<500 Register Only
Rich 2 stroke or 4 stroke Any HP≥500 Any 2.0
Lean 2 Stroke before 9/23/82 Any Any 8.0
after 9/23/82 & before 6/18/92 500≤HP<825 Any 8.0
HP≥825 Any 5.0
after 6/18/92 HP≥500 full load and speed and other operating conditions (except reduced speed, 80-100% of full torque) 2.0
reduced speed, 80-100% of full torque 5.0
4 stroke before 9/23/82 HP≥500 full load and speed and other operating conditions (except reduced speed, 80-100% of full torque) 5.0
reduced speed, 80-100% of full torque 8.0
after 9/23/82 and before 6/18/92 HP<825 full load and speed and other operating conditions (except reduced speed, 80-100% of full torque) 5.0
HP<825 reduced speed, 80-100% of full torque 8.0
HP≥825 Any 5.0
after 6/18/92 HP≥500 full load and speed and other operating conditions (except reduced speed, 80-100% of full torque) 2.0
reduced speed, 80-100% of full torque 5.0
Turbine HP>500 3.0
Must Document:
  1. AFR maintenance
  2. NOx & CO levels within 7 days of maintenance which might reasonably be expected to increase emissions.
  3. NOx & CO testing (via RM 7E & 10) within 60 days of startup to demonstrate compliance, then biennially.
Provided as a guide only. Reader should refer to TAC 106.512 for actual requirements.
Questions/comments: bart.delatte@ceconet.com

For a PDF version of this table, click HERE